Social Icons

Showing posts with label Arch Linux. Show all posts
Showing posts with label Arch Linux. Show all posts

How to setup mount / auto-mount USB Hard Drive on Raspberry Pi

Follow the simple steps in the order mentioned below to have your USB drive mounted on your Raspberry Pi every time you boot it.

*These steps works both on Raspbian Wheezy & Jessie*

These steps are required especially if your are setting up a Samba share, or a 24x7 torrent downloader, or alike where your Raspberry Pi must have your external storage already mounted and ready for access by the services / daemons.

Step 0.
Plug in your USB HDD / Drive to Raspberry Pi
If you are using a NTFS formatted drive, install the following
sudo apt-get install ntfs-3g

Step 1.
Log on pi using ssh terminal and execute:
ls -l /dev/disk/by-uuid/

You will see something like the following:

lrwxrwxrwx 1 root root 10 Jan  1  1970 0AC4D607C4D5F543 -> ../../sda1
Note down the value of the UUID --> 0AC4D607C4D5F543

Step 2.
Create a location for mount point:
sudo mkdir /media/NASDRIVE

Give proper permission:
sudo chmod 770 /media/NASDRIVE

Step 3.
Get the uid, gid for pi user and group with id command (usually 1000)

Step 4.
Mount the USB Drive and then check if it is accessible at /media/NASDRIVE
sudo mount -t ntfs-3g -o uid=1000,gid=1000,umask=007 /dev/sda1 /media/NASDRIVE

Note:
ntfs-3g for NTFS Drives
vfat for FAT32 Drives
ext4 for ext4 Drives

Step 5.
Now, we will configure RasPi to do this after every reboot:
Take a backup of current fstab and then edit
sudo cp /etc/fstab /etc/fstab.backup
sudo nano /etc/fstab

Add the mount information in the fstab file (replace UUID with your own):
UUID=0AC4D607C4D5F543 /media/NASDRIVE ntfs-3g uid=1000,gid=1000,umask=007 0 0

Step 6.
Reboot
sudo reboot

Step 8. (Optional, required if using as data storage for owncloud)
If you are configuring ownCloud's data directory on your NAS drive, it should be having a 770 permission for www-data user. You can simply add user www-data to pi group, since its already having 770 as permission as set above in fstab.

sudo usermod -a -G pi www-data


How to configure inotify to work with MiniDLNA and pickup changes in media_dir

With the advent smart computing devices like ARM processor based Raspberry Pi there has been a significant rise is people setting up their home DLNA Servers for streaming their multimedia collections like movies, videos, pictures directly to their internet enabled or DLNA enabled smart TVs. Even almost all modern Android devices are capable to receiving DLNA streams.

MiniDLNA is one of the very popular DLNA server being used by raspbian users and also by users of Arch Linux and even a large community of Ubuntu users, mainly due to to it's fairly small size and simple ease of use. However there is some issue with MiniDLNA in automatically picking up changes / additions to the media_dir (Media Directory) i.e. more often it doesn't picks up any new file if added to the folder and updates the database which appears on your DLNA renderer like TV.

It generally throws the following warning in the logs:
[2012/10/19 18:35:41] inotify.c:195: warn: WARNING: Inotify max_user_watches [8192] is low or close to the number of used watches [4] and I do not have permission to increase this limit.  Please do so manually by writing a higher value into /proc/sys/fs/inotify/max_user_watches.

While most of the solutions suggests setting up a cron job to rebuild the whole of the database at some specific time but hardly any of them address the fix to real issue or some says that the kernel or OS version doesn't supports the inotify feature. Also I don't like the idea of rebuilding the whole media library database every day or every time a new file is added, as ideally it should just add the new file in the media database  Some of you might have even tried to update /proc/sys/fs/inotify/max_user_watches but probably failed with a error "E667: Fsync failed" at the vi.

Solution:
Edit sysctl.conf (A file for defining kernel parameters)
sudo nano /etc/sysctl.conf

Find and change as below if the following line exists or add at the bottom:
fs.inotify.max_user_watches=65536

Save the file Ctrl + X and Y(es)

Now run the below command, you should be able to see the values you have set:
sudo /sbin/sysctl -p

Finally restart MiniDLNA service and things should be working:
sudo service minidlna restart

Note: Make sure you have inotify enabled and a notify interval is set as per your requirement in /etc/minidlna.conf per the following settings
inotify=yes
notify_interval=300