Social Icons

Showing posts with label NAS. Show all posts
Showing posts with label NAS. Show all posts

How to setup mount / auto-mount USB Hard Drive on Raspberry Pi

Follow the simple steps in the order mentioned below to have your USB drive mounted on your Raspberry Pi every time you boot it.

*These steps works both on Raspbian Wheezy & Jessie*

These steps are required especially if your are setting up a Samba share, or a 24x7 torrent downloader, or alike where your Raspberry Pi must have your external storage already mounted and ready for access by the services / daemons.

Step 0.
Plug in your USB HDD / Drive to Raspberry Pi
If you are using a NTFS formatted drive, install the following
sudo apt-get install ntfs-3g

Step 1.
Log on pi using ssh terminal and execute:
ls -l /dev/disk/by-uuid/

You will see something like the following:

lrwxrwxrwx 1 root root 10 Jan  1  1970 0AC4D607C4D5F543 -> ../../sda1
Note down the value of the UUID --> 0AC4D607C4D5F543

Step 2.
Create a location for mount point:
sudo mkdir /media/NASDRIVE

Give proper permission:
sudo chmod 770 /media/NASDRIVE

Step 3.
Get the uid, gid for pi user and group with id command (usually 1000)

Step 4.
Mount the USB Drive and then check if it is accessible at /media/NASDRIVE
sudo mount -t ntfs-3g -o uid=1000,gid=1000,umask=007 /dev/sda1 /media/NASDRIVE

Note:
ntfs-3g for NTFS Drives
vfat for FAT32 Drives
ext4 for ext4 Drives

Step 5.
Now, we will configure RasPi to do this after every reboot:
Take a backup of current fstab and then edit
sudo cp /etc/fstab /etc/fstab.backup
sudo nano /etc/fstab

Add the mount information in the fstab file (replace UUID with your own):
UUID=0AC4D607C4D5F543 /media/NASDRIVE ntfs-3g uid=1000,gid=1000,umask=007 0 0

Step 6.
Reboot
sudo reboot

Step 8. (Optional, required if using as data storage for owncloud)
If you are configuring ownCloud's data directory on your NAS drive, it should be having a 770 permission for www-data user. You can simply add user www-data to pi group, since its already having 770 as permission as set above in fstab.

sudo usermod -a -G pi www-data


How to Setup Samba network share on Raspberry Pi

Raspberry Pi is one of the hottest thing in the tech world today with endless utilities. One of the common use is to set up a NAS (Network Area Storage) server, which you can access over your home netlibpam-smbpasswork (Wired LAN or WiFi).


Assuming your storage drive (USB HDD in this case) is already mounted we will proceed with the steps. If you haven't followed the steps to mount your USB HDD yet then follow my other guide here, and then return to this point.

Step 1.
Install Samba
sudo apt-get install samba samba-common-bin

Update: Install libpam-smbpass (For auto sync of unix user passwords)
sudo apt-get install libpam-smbpass

Step 2.
Backup Samba configuration file, and then configure Samba
sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.backup

Edit smb.conf
sudo nano /etc/samba/smb.conf

You can copy over the configurations from the below snippet replacing the path to your mounted USB drive.


Step 3.
Restart Samba
sudo service samba restart

You should be able to access your NAS from any windows / unix system using the following path \\RaspPiNAS

Remember you will require to provide credentials of a valid user as added on Raspberry Pi to be able to access the share. If you want it to behave differently then change the settings for security = user and valid users = @users related parameters.