Social Icons

Showing posts with label mount. Show all posts
Showing posts with label mount. Show all posts

How to setup mount / auto-mount USB Hard Drive on Raspberry Pi

Follow the simple steps in the order mentioned below to have your USB drive mounted on your Raspberry Pi every time you boot it.

*These steps works both on Raspbian Wheezy & Jessie*

These steps are required especially if your are setting up a Samba share, or a 24x7 torrent downloader, or alike where your Raspberry Pi must have your external storage already mounted and ready for access by the services / daemons.

Step 0.
Plug in your USB HDD / Drive to Raspberry Pi
If you are using a NTFS formatted drive, install the following
sudo apt-get install ntfs-3g

Step 1.
Log on pi using ssh terminal and execute:
ls -l /dev/disk/by-uuid/

You will see something like the following:

lrwxrwxrwx 1 root root 10 Jan  1  1970 0AC4D607C4D5F543 -> ../../sda1
Note down the value of the UUID --> 0AC4D607C4D5F543

Step 2.
Create a location for mount point:
sudo mkdir /media/NASDRIVE

Give proper permission:
sudo chmod 770 /media/NASDRIVE

Step 3.
Get the uid, gid for pi user and group with id command (usually 1000)

Step 4.
Mount the USB Drive and then check if it is accessible at /media/NASDRIVE
sudo mount -t ntfs-3g -o uid=1000,gid=1000,umask=007 /dev/sda1 /media/NASDRIVE

Note:
ntfs-3g for NTFS Drives
vfat for FAT32 Drives
ext4 for ext4 Drives

Step 5.
Now, we will configure RasPi to do this after every reboot:
Take a backup of current fstab and then edit
sudo cp /etc/fstab /etc/fstab.backup
sudo nano /etc/fstab

Add the mount information in the fstab file (replace UUID with your own):
UUID=0AC4D607C4D5F543 /media/NASDRIVE ntfs-3g uid=1000,gid=1000,umask=007 0 0

Step 6.
Reboot
sudo reboot

Step 8. (Optional, required if using as data storage for owncloud)
If you are configuring ownCloud's data directory on your NAS drive, it should be having a 770 permission for www-data user. You can simply add user www-data to pi group, since its already having 770 as permission as set above in fstab.

sudo usermod -a -G pi www-data


USB drive not mounted before transmission daemon startup - Raspberry Pi


Many Raspbian users face a common issue of transmission daemon (service) getting started before their USB HDD is auto mounted by the Raspberry Pi or Raspbian where as for some the issue simply doesn't exists.

The issue lies in the auto mount feature with Raspbian Wheezy, which automatically mounts the USB drives when X-mode (GUI mode) is enabled on bootup. Primarily I would suggest to keep that mode disabled unless you are using RasPi with a head (Read: Monitor / Display), as it otherwise unnecessarily wastes system resources. In case you don't want to disable it for your daily use, just disable it for the time being of this fix but running "sudo raspi-config" and selecting appropriate option then rebooting your pi.

Now, lets see the steps to configure the mount point for USB Drive and set it to be done after every reboot automatically.

Step 0.
Make sure the GUI (X-mode) is turned off
Plug in your USB HDD / Drive to RasPi


Step 1.
Log on pi using ssh terminal and execute:
ls -l /dev/disk/by-uuid/

You will see something like the following:

lrwxrwxrwx 1 root root 10 Jan  1  1970 0AC4D607C4D5F543 -> ../../sda1

Note down the value of the UUID --> 0AC4D607C4D5F543

Step 2.
Create a location for mount point:
sudo mkdir /media/NASDRIVE

Give proper permission:
sudo chmod 775 /media/NASDRIVE

Step 3.
Mount the USB Drive and then check if it is accessible at /media/NASDRIVE
sudo mount -t ntfs-3g -o uid=pi,gid=pi /dev/sda1 /media/NASDRIVE

Note:
ntfs-3g for NTFS Drives
vfat for FAT32 Drives
ext4 for ext4 Drives

Also, if ntfs-3g is not installed u might have to install it by:
sudo apt-get install ntfs-3g

Step 4.
Now, we will configure RasPi to do this after every reboot:

Take a backup of current fstab
sudo cp /etc/fstab /etc/fstab.backup

Add the mount information in the fstab file:
UUID=0AC4D607C4D5F543 /media/NASDRIVE ntfs-3g rw,defaults 0 0

Step 5.
Reboot
Turn on the GUI mode by sudo raspi-config, only if required.





You should see your USB drive automatically mounted at /media/NASDRIVE

Now, even your transmission should also be able to get your drive in mounted state while the service starts.